SinisterBabo
Bumblebee
Get your quality parts for the winter project or a solid track bike for next season. Willing to sell whole ($2,500 firm) or trade for a couple dirt bikes in good condition. Parting out once motor, frame, and suspension claimed/sold.
2007 GSXR 750
13k miles
No Title (Bills of Sale since 2009 and its initial dyno/tune output at 135 rwhp).
Currently in Charlotte, NC, but can deliver within 2 hour radius free or for fee up to 5 hours away.
Flatshifter Expert Quickshifter (Up & Autoblip Down, works in Std or GP)
Front Forks - GP 20mm kit, GP extenders, new springs
Penske Triple Clicker Rear Shock, new spring
2 TDs on Thermosman-refreshed suspension (setup for 180-200lbs)
Scott's Steering Damper
PC3
Vortex Gen 1 Keyless Gas Cap
Vortex 50mm Clip Ons
Woodcraft 50/48mm Clip Ons (Spare)
Woodcraft Case Covers L&R
Woodcraft Frame Sliders with New Pucks
Woodcraft Rearsets (Almost 2 Full Sets)
Woodcraft Brake Reservoir Holder
Brembo 19x18 Front MC
CRG Clutch Perch + Lever
SS Lines
EBC Wave Rotors
Gen 3 ZX10R Calipers (same pads as stock)
Vesrah RJLs with 1/3 life, new SRJL17 pads included
Akrapovic Slip-on Exhaust
BMC Air Filter
2 Sets of Wheels (2 Black R/1 Blue+1 Black F)
Blue/black set has a new SC1 rear and take off front slicks
2 Subframes
2 Rear Subframe (1 Motoholders BNIB, 1 OEM)
Disclosures (Everything should be pictured, let me know if you need further pictures)
Cluster plastic has some brake fluid etching
Akrapovic slip-on endcap has some rash
Wiring harness has a DIY keyless ignition
2 upper/lower sets of rough bodywork - I didn't touch the upper from the picture after the crash, just mounted on a spare, ugly, but solid upper/lower
Tank comes with new fairing but is dented from behind the gas cap to the bottom of tank pad
One of the 2 top radiator mounts broke off (can be welded back on, but I just used safety wire since the bottom and remaining top hold)
Spool bosses broke off
2007 GSXR 750
13k miles
No Title (Bills of Sale since 2009 and its initial dyno/tune output at 135 rwhp).
Currently in Charlotte, NC, but can deliver within 2 hour radius free or for fee up to 5 hours away.
Flatshifter Expert Quickshifter (Up & Autoblip Down, works in Std or GP)
Front Forks - GP 20mm kit, GP extenders, new springs
Penske Triple Clicker Rear Shock, new spring
2 TDs on Thermosman-refreshed suspension (setup for 180-200lbs)
Scott's Steering Damper
PC3
Vortex Gen 1 Keyless Gas Cap
Vortex 50mm Clip Ons
Woodcraft 50/48mm Clip Ons (Spare)
Woodcraft Case Covers L&R
Woodcraft Frame Sliders with New Pucks
Woodcraft Rearsets (Almost 2 Full Sets)
Woodcraft Brake Reservoir Holder
Brembo 19x18 Front MC
CRG Clutch Perch + Lever
SS Lines
EBC Wave Rotors
Gen 3 ZX10R Calipers (same pads as stock)
Vesrah RJLs with 1/3 life, new SRJL17 pads included
Akrapovic Slip-on Exhaust
BMC Air Filter
2 Sets of Wheels (2 Black R/1 Blue+1 Black F)
Blue/black set has a new SC1 rear and take off front slicks
2 Subframes
2 Rear Subframe (1 Motoholders BNIB, 1 OEM)
Disclosures (Everything should be pictured, let me know if you need further pictures)
Cluster plastic has some brake fluid etching
Akrapovic slip-on endcap has some rash
Wiring harness has a DIY keyless ignition
2 upper/lower sets of rough bodywork - I didn't touch the upper from the picture after the crash, just mounted on a spare, ugly, but solid upper/lower
Tank comes with new fairing but is dented from behind the gas cap to the bottom of tank pad
One of the 2 top radiator mounts broke off (can be welded back on, but I just used safety wire since the bottom and remaining top hold)
Spool bosses broke off