2005 Ducati 999

peoples1234

peoples1234

New Member
2005 Ducati 999 currently setup with track fairings

5880 miles
Belts and Valves done @ 5283
Elka rear shock, only two track days since refresh
Showa forks with Ohlins internals, work done by Cogent Dynamics - two days since build
Shorai Battery
OEM fairings - need repainting, but are not cracked or damaged in any way
PCIII - tuned by DucPond
Spark Titanium Slip-on
Clean MD Title

I have everything that would be needed to put it back to street duty, minus a fairing stay wing. Nevertheless, this bike makes a great track bike.

$5000 for y'all as it sits. I can go lower, but I'll have to take off the Spark and the Elka to do so.

Thanks,
Chris
7z7y6i3YB-I_dP6oRp1H28wXIapLWGX1MHQG-IY8l6hMfHUq5Hl-sAJboTga9UAj2UgLOBFwMjE853POjVA_ek_3xc2g8i5UJLfsJ-DtlXcy1hgIncHIp-mumOQV2QYTL7Rx_q7He7c-9taWeMZcTWL6E_UzPQA66UXAeybpH3_TUnxYdm0nOhVOL9_WM7eobVmVBZK096VIfXiKZzRuAqJ59ZGBrTijN6XCpVrQuy_k0UcoJOvyjzMaIB2HmkTPvbXKdTW9TJ8plpq8x8oG5vKVJf3gq-BlRUy0hkPR6U2Gdn1ZRYgTlXQOxbbEtNtaulVeLIqvq7wvRk5K7L1YRAsI1ateGA6JryUDaEq5b6QMKu5Lz2takbM7icqScLPZLMqicVcftf1uYTbZfwLRh-4AbN-MCFGizdK8kI76tc1j0Z_ijUVUXunX2dq23jzsrtwKT-AzwD92_IKboI84su9AmEhy0rstXv8W0qpxExWU7oQqO-j0tOtSVhftl6oqZCG6g4H0pGb3PasnsJljxqQs3NkCsbD0F2Iwxso=w1022-h684-no

WNGgNPJF59prTo8PkHXRZkCHxGPMF6qvRZB-L2D2tF09z81-fSmosVvKEly5VjCKhyOha7wfVkjoCHjxNyrYwQU1zguvIEEdxxipaA7XtQYYwyu7SBhSUdrueM2Qu1s0kQLz1cT5eztlbkFxFV38B18vuPt9ysz_t1Yx4UvkBC0wu9zSvEc5-8Y5sc34QAvZiii6Wd2rjIFptZcDD7cAjLX9KCuCr8iqxU0DfODxHJ9A2dobAvQaKaUcLt9bbMvedDIAMguJ6lM0WCFkKLFIXk4gbcw0_BBbFCGU4Or1K82lP2hzPr2pSK3MmZWcJ8qNuQVZ3Z4_opeapWaPseUJXPhe2-VA6S8MfXheqaa9lvtMSIOPfl_rpTnYf9rZ_FUc0lWYcOdapC3gORrKrVJ8H-U8OTM7sfW3KTLA775o72Gnlr-IoKJHNg8LCttiANnoOdgy0KaonsvynxeOBi1U_10v73bvBlXduFn0kFEKMW6iZZ09awUgduALIu3Gg_Pw3zonfPk1IuWyrAkZeB4ZHooM4T0YkYGv1CJw_WQ=w1022-h684-no
 
peoples1234

peoples1234

New Member
The bike was setup for me with gear @ 285. I'm of the heavier variety...lol. Nevertheless, the front springs are actually a little under sprung for me because ohlins didn't make ones that would be exact for me and I didn't want to have a custom set machined. The rear is spot on for my weight. I do have another rear spring I will thrown in with the bike for a 185-200 lbs rider.
 
peoples1234

peoples1234

New Member
Oh I knew I'd forget something.

The bike is in Poolesville, MD or about 45 mins NW of DC. Also it does have a slipper clutch that I put in as well.
 
P

pjzocc

Member
Chris - have you got pics of the street stuff? Could you email to: philipz217 at gmail dot com ?

I had a 999. I sold my 999.

I miss my 999.

(longshot but... interested in any trades?) :D
 
peoples1234

peoples1234

New Member
Not really interested in trades, but you could bend my ear in a PM if you want.

I have had a few people ask for pictures of the OEM plastics, so I will be pulling them out of the attic soon. Probably can't do it until Sunday though...
 
You must log in or register to reply here.
Top