2008 Honda CBR1000RR - Very Clean

ijkelly

New Member
2008 Honda CBR1000RR - Clean title in hand
  • Ohlins front NIX 30, 30 mm inserts done by Markbilt & Ohlins TTX GP set up for 180 lbs rider at advanced/expert pace. 6 track days on suspension. ($3,000 install)
  • Sharkskins bodywork with Superbike tail, Custom Repsol Paint
  • Yoyodyne Slipper Clutch
  • Vortex sprockets & chain (-1/+2)
  • Vortex clip ons
  • ASV Levers
  • Key switch harness (eliminator)
  • Galfer SS front brake lines
  • Annitori Pro Quickshift
  • Woodcraft readsets
  • Power commander 3
  • K&N airfilter
  • Two brother slip on
  • Woodcraft frame sliders
  • EBC front brake pads
  • Dunlop GPA-pro medium compound (1 day left on both)
  • Vortex Quick fill gas cap
Bike runs great and the suspension is dialed in perfect. Bike only has 6 track days on it since it was converted. I was able to get the bike to run a 1.33 at NYST. Bike has never been raced but is ready to race if needed.

I've maintaned this bike very well, oil changes every 3k miles on the street and every 3-4 track days. I oil/lube all the moving parts on a regular basis. As you can see from the pictures the bike is very clean too.

I'm selling this bike because it's a secondary track bike for me and I'm looking to only ride a 600 on the track.

Clean title in hand, only 1 owner. Bike is currently located near Scranton, PA but can be brought down near West Chester, PA or up to NYST depending on the weekend.
 

Attachments

  • 20180728_134225.jpg
    20180728_134225.jpg
    954.8 KB · Views: 149
  • 20180728_134234.jpg
    20180728_134234.jpg
    753.4 KB · Views: 137
  • 20180728_134243.jpg
    20180728_134243.jpg
    857 KB · Views: 124
  • 20180728_134317.jpg
    20180728_134317.jpg
    712.4 KB · Views: 122
  • 20180728_134329.jpg
    20180728_134329.jpg
    546.1 KB · Views: 122
  • 20180728_134347.jpg
    20180728_134347.jpg
    469.4 KB · Views: 124

ijkelly

New Member
Do you know anyone looking for OEM repsol plastics. They came off a 2016 cbr 1000 since the bike it a full track bike no need to have them.

Not that I know of.. but if I were you, I'd hold onto them along with all the other street parts. it's not easy selling a designated track bike. For some reason people want to ride track bikes on the street too..
 

Neal johnson

New Member
Let me know if you decide to part out. Would be interested in wheels and race body work


Sent from my iPhone using Tapatalk
 

ijkelly

New Member
I've decided to part this bike out. Hit me up with an offer on any of the parts and we can work out a deal.
 
Top