04-07 CBR1000RR Mega Thread (HRC, Sharkskinz, Arrow, Brembo, Chrome Wheels, etc...)
- Thread starter hoppa2k6
- Start date
hoppa2k6
Member
Clear Alternatives Integrated BLUE Tail Light - $60 shipped
Aftermarket Tail Light
Decent condition. Previous owner cracked the side of it backing it into the garage. No missing pieces of plastic, just a few cracks in the plastic. Was repaired and doesn't take any water up.
$50 shipped
Rear Passenger Pegs
Have a few sets laying around.
Most sets are near mint - $60 shipped / pair
One set rashed a bit - $30 shipped
Near Mint pix:
Rashed pix:
Throttle Assemblies
Complete with housing and cables. One with grip on, one with grip off.
$50 each
Clutch slave
Think I have like 12 of these for some reason. Got one currently that I can get out the door right away. $15 shipped
Chain Guard - $10 shipped
Gas Cap Assembly and Trunk Lock with key, no ignition - $50 shipped
Rear brake and mount WITH galfer stainless brakeline - $75 shipped
Aftermarket Tail Light
Decent condition. Previous owner cracked the side of it backing it into the garage. No missing pieces of plastic, just a few cracks in the plastic. Was repaired and doesn't take any water up.
$50 shipped
Rear Passenger Pegs
Have a few sets laying around.
Most sets are near mint - $60 shipped / pair
One set rashed a bit - $30 shipped
Near Mint pix:
Rashed pix:
Throttle Assemblies
Complete with housing and cables. One with grip on, one with grip off.
$50 each
Clutch slave
Think I have like 12 of these for some reason. Got one currently that I can get out the door right away. $15 shipped
Chain Guard - $10 shipped
Gas Cap Assembly and Trunk Lock with key, no ignition - $50 shipped
Rear brake and mount WITH galfer stainless brakeline - $75 shipped
hoppa2k6
Member
Flasher relays - both brand new, one without packaging - $20 shipped each
Rear shock off my 04 - $30 shipped
Tank Panels - $25 shipped for a set of 4. Multiple sets available
Clutch line - $15 shipped
Chrome Clutch Cover with mounting bolts (two covers available) Brand new! - $40 shipped each (one sold)
Blue and Yellow Tank Shelter with Carbon Fiber Inserts
Great Condition. Comes with CF look tank pad. Will not part out the inserts, they are epoxied in place.
$160 shipped
06-07 Candy Phoenix Blue Lowers (some heat damage...but looks great at 50mph or 50 feet away!) No cracks or missing tabs - $100 shipped
Rear shock off my 04 - $30 shipped
Tank Panels - $25 shipped for a set of 4. Multiple sets available
Clutch line - $15 shipped
Chrome Clutch Cover with mounting bolts (two covers available) Brand new! - $40 shipped each (one sold)
Blue and Yellow Tank Shelter with Carbon Fiber Inserts
Great Condition. Comes with CF look tank pad. Will not part out the inserts, they are epoxied in place.
$160 shipped
06-07 Candy Phoenix Blue Lowers (some heat damage...but looks great at 50mph or 50 feet away!) No cracks or missing tabs - $100 shipped
hoppa2k6
Member
06 Candy Phoenix Blue/Pearl Yellow Tank with light scratches on right side - $100 shipped
scratches:
04-05 Red and Black Tank with minor marks (should buff out) - $125 shipped
Great condition 04-05 Lower Right - $100 shipped
Gutted intake (like a CF intake, but without the hefty price tag and no issues modding it to fit. Bolts right up!) - $85 shipped
Rear Caliper Relocator
Just buy a brembo caliper on ebay for $50-100 and a new brake line and you'll save $150 or more over going with a carrozzeria setup.
$75 shipped
scratches:
04-05 Red and Black Tank with minor marks (should buff out) - $125 shipped
Great condition 04-05 Lower Right - $100 shipped
Gutted intake (like a CF intake, but without the hefty price tag and no issues modding it to fit. Bolts right up!) - $85 shipped
Rear Caliper Relocator
Just buy a brembo caliper on ebay for $50-100 and a new brake line and you'll save $150 or more over going with a carrozzeria setup.
$75 shipped
hoppa2k6
Member
Ohlins Titanium Spring - $300
Fits NON-TTX Ohlins Shocks. Sprung for lightweight rider. ~150-165lbs
Engine Building Kit - $2000obo
Will not part out. You want something in the list, buy the whole thing and part the rest out. Kit includes the following:
HRC JSB Spec Cams (Brand new)
Ten Kate Pistons (Used for 400 miles)
HRC Springs (Used)
Ferrea Competition Valves
Cams:
Pistons:
Valves:
Fits NON-TTX Ohlins Shocks. Sprung for lightweight rider. ~150-165lbs
Engine Building Kit - $2000obo
Will not part out. You want something in the list, buy the whole thing and part the rest out. Kit includes the following:
HRC JSB Spec Cams (Brand new)
Ten Kate Pistons (Used for 400 miles)
HRC Springs (Used)
Ferrea Competition Valves
Cams:
Pistons:
Valves:
hoppa2k6
Member
Sharkskinz Supersport Tail - $225 shipped
In near mint shape (in the pictures, there looks like some damage, but it's just some weird flash glare), this tail was painted with a custom dark red metallic on black. You can't see it in the photos, but get the tail out in the sun and it pops. Tail currently has a functional tail light for street riding; however, two holes were drilled in the tail for track riding (lap timer).
Gold Carbon Fiber (real) Front and Rear Huggers - $175 shipped
Great condition, no cracks or missing tabs.
OEM Candy Phoenix Blue Front Fender with Verad Lighting Kit - $175 shipped
Front OEM fender comes with a Verad White Lighting system ($200 kit brand new). Four high power led housings (I used the two in the front fender and one on the right side of the swingarm). Lighting kit allows for strobe, heartbeat, or solid on. Really looks good on powder coated or polished wheels with painted spokes. The right side of the fender has some kind of melting issue from where the previous owner must have tried to remove the epoxied led units (and consequently was not successful).
In near mint shape (in the pictures, there looks like some damage, but it's just some weird flash glare), this tail was painted with a custom dark red metallic on black. You can't see it in the photos, but get the tail out in the sun and it pops. Tail currently has a functional tail light for street riding; however, two holes were drilled in the tail for track riding (lap timer).
Gold Carbon Fiber (real) Front and Rear Huggers - $175 shipped
Great condition, no cracks or missing tabs.
OEM Candy Phoenix Blue Front Fender with Verad Lighting Kit - $175 shipped
Front OEM fender comes with a Verad White Lighting system ($200 kit brand new). Four high power led housings (I used the two in the front fender and one on the right side of the swingarm). Lighting kit allows for strobe, heartbeat, or solid on. Really looks good on powder coated or polished wheels with painted spokes. The right side of the fender has some kind of melting issue from where the previous owner must have tried to remove the epoxied led units (and consequently was not successful).
hoppa2k6
Member
Galfer 320mm Wave Rotors - $315 shipped
Little use. Used lightly on the street for Sunday joy riding for about 1000 miles.
Current thickness - 5.31mm (I think new they are around 5.5mm)
Minimum Recommended Thickness - 4.5mm
Stock 2006 Shock - $85 shipped
Pulled after about 800 miles. Thing looks brand new.
Barnett Clutch Kits - $100 each
Includes Springs, Fiber plates, and Steel Plates. I oiled one set up when I was going to install a set into a friend's bike but he ended up not wanting to do the install because he found a new bike and sold his. Both kits are brand new tho.
Hyperco Spring - $50
Spring would work great for a 250lbs rider.
Ohlins Spring (like new) - $80
Rear Rotors (three available) - $85 shipped each
Little use. Used lightly on the street for Sunday joy riding for about 1000 miles.
Current thickness - 5.31mm (I think new they are around 5.5mm)
Minimum Recommended Thickness - 4.5mm
Stock 2006 Shock - $85 shipped
Pulled after about 800 miles. Thing looks brand new.
Barnett Clutch Kits - $100 each
Includes Springs, Fiber plates, and Steel Plates. I oiled one set up when I was going to install a set into a friend's bike but he ended up not wanting to do the install because he found a new bike and sold his. Both kits are brand new tho.
Hyperco Spring - $50
Spring would work great for a 250lbs rider.
Ohlins Spring (like new) - $80
Rear Rotors (three available) - $85 shipped each
hoppa2k6
Member
Bumpski
added:
HRC KIT Back Torque Limiter Slipper Clutch - $600 shipped
Picked this up from a friend and it's just been sitting in my HRC Parts Museum since. Believe it came from Pegram's bike from what I've been able to gather. Tons of deets in the HRC manual. Have to grind a bit of the right crankcase cover to make it fit. HRC manual covers it in depth. I have a copy if you need it for the install.
added:
HRC KIT Back Torque Limiter Slipper Clutch - $600 shipped
Picked this up from a friend and it's just been sitting in my HRC Parts Museum since. Believe it came from Pegram's bike from what I've been able to gather. Tons of deets in the HRC manual. Have to grind a bit of the right crankcase cover to make it fit. HRC manual covers it in depth. I have a copy if you need it for the install.