08+ Yamaha R6, MotoAmerica 600SS spec, priced to sell

Discussion in 'Motorcycles' started by tittys04, Feb 18, 2018.

  1. tittys04

    tittys04 Member

    I'm selling my 08 R6 to move on to bigger things. This bike is 600SS legal with MA; the frame is an 08 but all of the updates have been performed, including air box and engine updates. It's an ex-graves bike ridden by Chris Filmore, and purchased by me in late 2012, I've owned it since. It's a race bike, it has been crashed and is not off the show-room floor pristine, but it has been very well maintained.

    The list of goodies is as follows:

    * Superstock engine built by Jamie Hanshaw. The engine has 1 season on it, had all new pistons, rings, and valves ($$$) and several gears were also replaced. It's a STRONG engine that shifts very well through all the gears.
    * AK20 carts with fork extenders up front (setup for 175# rider)
    * Ohlins TTX in rear (setup for 175# rider)
    * Sharkskinz body: Body was crashed but professionally repaired and painted by Andrew Swenson. For all intents and purposes, it's a new set of Sharkskinz with a killer Kyle Wyman Racing paint job.
    * Graves TI Exhaust: There is a small dent in the tip of the can, but otherwise it's in great shape.
    * Graves Clip-ons
    * Graves seat pan and cushion
    * Graves quick disconnect upper fairing mounts
    * Graves shark fin
    * Captive shock clevis with hole drilled in sub frame to access the top shock mount
    * YEC Kit ECU with Dynojet QS
    * Vortex rear sets
    * Vortex gas cap
    * Woodcraft engine cases
    * Pitbull Steering damper
    * Vesrah SS pads
    * SS brake lines front and rear
    * Tapered steering stem bearings
    * Fresh fluids (Motul 300V used exclusively, RBF660, and Engine Ice)
    * Speedbleeders all around
    * Lightened rear rotor
    * Brake lever guard
    * Captive rear brake bracket
    * Captive spacers, front and rear (custom, red anodize)
    * 90 deg valve stems
    * Safety wired well beyond WERA/CCS standards

    The bike comes with a second set of Sharkskinz bodywork. It isn't perfect, has been crashed, but is structurally very good and only has minor cosmetic blemishes. The paint on the second set is blue and white.

    The bike does not come with stands or any other spares not listed.

    Price: $7900
    Location: Alexandria, VA

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. tittys04

    tittys04 Member

    Bumpity
     
  3. kappy1000

    kappy1000 Control Rider Director

    Great bike and seller! GLWS Eric.
     
    tittys04 likes this.
  4. tittys04

    tittys04 Member

    I've decided to hold onto the extra bodywork for another project, so I'm going to drop the price to $6900 for a quick sale.
     
    Otto Man likes this.
  5. tittys04

    tittys04 Member

    Bump it up!
     
  6. tittys04

    tittys04 Member

    Make an offer.
     
  7. Emerson

    Emerson BobbleHeadMoto Control Rider

    I mean I guess I should.
     
  8. kappy1000

    kappy1000 Control Rider Director

    Can't believe you waited this long...:D
     
  9. HandsomeBanana

    HandsomeBanana New Member

    Please let me know if you decide to part the bike out.
    Regards,
    Bryan
     
  10. tittys04

    tittys04 Member

    Haha.
     
  11. tittys04

    tittys04 Member

    I will not part it, but Emerson will surely have what you need.
     
    Emerson likes this.
  12. scythe

    scythe New Member

    Is this still for sale? If so, what has it dyno'ed at?
     
  13. tittys04

    tittys04 Member

    It is still for sale. It's strong, 1 season on a SS build by Jamie Hanshaw. New valves ($$), pistons, rings, and a couple gears. It's damn near a new engine.
     
  14. Emerson

    Emerson BobbleHeadMoto Control Rider

    Jamie Hanshaw builds some bad ass motors. Mine had 3 seasons of racing, trackdays, coaching and 1.5 seasons of endurance racing, and still going strong!
     
    Backmarker and tittys04 like this.
  15. tittys04

    tittys04 Member

    Still looking for a good home. This is the perfect track bike ;)
     
    Otto Man likes this.
  16. Mike Sinatra

    Mike Sinatra New Member

    Still available?
     
  17. tittys04

    tittys04 Member

    Yep. Just sitting in the garage waiting for a good home.
     
  18. Pfraser

    Pfraser New Member

    This sounds like a great bike! The pictures aren't loading, could you repost them?
     
  19. tittys04

    tittys04 Member

    Interesting... here they are.
    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
     
    raineman021 likes this.

Share This Page