Poper
Member
2007 Honda CBR600RR
Title: Clear (New York State)
Location: Syracuse, NY
Miles: 6,889
Price: $5,750
Modifications:
-Sharkskinz bodywork (superbike tail)
-Hotbodies double-bubble windscreen
-GMD Computrack 20mm kit w/1.05 springs (refreshed 4/12)
-Elka two-way rear shock w/750 lbs. spring (refreshed 4/12)
-Pirelli racing slicks (120/180, SC2 compound) with 5 sessions on them
-Yoyodyne fairing stay
-Vortex rearsets
-Vortex clip-ons
-Vortex sprockets (-1/+2) w/520 conversion
-Woodcraft case covers (both sides of motor)
-HRC quick-turn throttle (full cable, tube, and housing)
-Brembo master cylinder w/folding lever (19x18)
-Galfer superbike lines
-Vesrah RJL brake pads
-Renthal grips
-CRG clutch lever
-Frame sliders
-Repsol 10W40 full synthetic oil
-K&N Oil Filter
-WaterWetter in radiator
-Fully safety wired
Spares (included):
-Pitbull Trailer Restraint System pins (not shown)
-Pitbull triple-stand pin-#6 (not shown)
-Factory service manual (paper and .pdf)
-Owner’s Manual and Vortex diagram
-HRC quick-turn throttle tube and housing
-Stock master cylinder w/CRG lever
-Vortex clip-on bars (2)
-Spare master cylinder-to-reservoir joint
-Spare brake reservoir
-Case cover (stock)
-Clutch and brake lever (stock)
-Stock throttle cable, housing, and tube
-Stock shifting linkage (bolts and Vortex rod)
-Ram air cover and screen
-Elka shock perch
Note: This CBR is a turn-key, reliable, and ready to ride race bike. The motor is rock-solid and the entire bike has always been meticulously maintained. I am the original owner, and I have only ridden 4 track days on it this season. All spares come with the sale and I can aid in delivery. 600’s are a blast, and this Honda is a standout, but I am ready to move up to a 1000. Contact me via email or phone for quickest response.
Thanks,
Mike
icehouse_@hotmail.com
(315) 214-1958
Title: Clear (New York State)
Location: Syracuse, NY
Miles: 6,889
Price: $5,750
Modifications:
-Sharkskinz bodywork (superbike tail)
-Hotbodies double-bubble windscreen
-GMD Computrack 20mm kit w/1.05 springs (refreshed 4/12)
-Elka two-way rear shock w/750 lbs. spring (refreshed 4/12)
-Pirelli racing slicks (120/180, SC2 compound) with 5 sessions on them
-Yoyodyne fairing stay
-Vortex rearsets
-Vortex clip-ons
-Vortex sprockets (-1/+2) w/520 conversion
-Woodcraft case covers (both sides of motor)
-HRC quick-turn throttle (full cable, tube, and housing)
-Brembo master cylinder w/folding lever (19x18)
-Galfer superbike lines
-Vesrah RJL brake pads
-Renthal grips
-CRG clutch lever
-Frame sliders
-Repsol 10W40 full synthetic oil
-K&N Oil Filter
-WaterWetter in radiator
-Fully safety wired
Spares (included):
-Pitbull Trailer Restraint System pins (not shown)
-Pitbull triple-stand pin-#6 (not shown)
-Factory service manual (paper and .pdf)
-Owner’s Manual and Vortex diagram
-HRC quick-turn throttle tube and housing
-Stock master cylinder w/CRG lever
-Vortex clip-on bars (2)
-Spare master cylinder-to-reservoir joint
-Spare brake reservoir
-Case cover (stock)
-Clutch and brake lever (stock)
-Stock throttle cable, housing, and tube
-Stock shifting linkage (bolts and Vortex rod)
-Ram air cover and screen
-Elka shock perch
Note: This CBR is a turn-key, reliable, and ready to ride race bike. The motor is rock-solid and the entire bike has always been meticulously maintained. I am the original owner, and I have only ridden 4 track days on it this season. All spares come with the sale and I can aid in delivery. 600’s are a blast, and this Honda is a standout, but I am ready to move up to a 1000. Contact me via email or phone for quickest response.
Thanks,
Mike
icehouse_@hotmail.com
(315) 214-1958
