Rear spring collar tolerance?

Ansleywynn4

New Member
I’ve got a new spring for my 2nd gen r6 direct from racetech.

Got the single collar bushing spacer that they recommended and have the old spring off.

My question- how much lateral play is acceptable at either end of the spring?

I started to install it and noticed that there was some play in between them.

Oem had about 1.5-2mm

The new bushing has about that on the ID to the od of the stock collar
The new spring has about 3.5 to the od of the bushing.
Totaling what seems like a wobbly ~5mm...

Tried getting racetech with no responses.

Do I have the wrong spacer bushing?
Am I being paranoid? Is that much play normal?

Any insight from the gurus is much appreciated


Sent from my iPhone using Tapatalk
 

Ansleywynn4

New Member
Not in the shop now- but this may shed some more light.

Thanks for the response!
9a79687d99bedb7e79a33cd839bc065d.jpg



Sent from my iPhone using Tapatalk
 
Top