TWO BIKES: 2002 SV650S - LOTS of Spares/1972 CB350/Four unfinished vintage race bike build

[kubricky]

2002 SV650S

2002 SV650S, new tires, runs great 2500.00 FIRM - ready for someone to set it up for track/race.

Spares List:

- Spare Motor
- Spare Motor (Parts)
- Set of spare wheels
- Spare Full Muzzy Exhaust
- Spare M4 can
- Three (3) LARGE bins of CATALOGUED spares
- Spare Race Fairing Stay
- Spare Subframe

For pictures, list of spares in the parts bin, or more information, DM me.

1972 CB350 FOUR Unfinished Vintage Race Bike Build

Bike is together, frame seams have been welded for racing, runs strong, and is in test build for rearset fitting - 2200.00 FIRM. Ignition has been replaced with electronic ignition.

- New tires (race only)
- New Rearset Kit
- New Seat Kit
- Spare set of wheels
- Spare Frame (CB360 – welded seams)
- Spare Motor
- Various Spare OEM Parts
- Two (2) LARGE bins of spare parts
- Various motor parts

New Keihin Carbs will be included for an ADDITIONAL 1000.00. The carbs have been tuned and tested.


For pictures, list of spares in the parts bin, or more information, DM me.

I'M NOT PARTING OUT EITHER BIKE RIGHT NOW.

 

[kubricky]

IF you have emailed me, I'll get pics and information to you this weekend, I've been out of town.

 

[kubricky]

For the SV650S - three bins have been consolidated to one large plastic bin and several boxes of case covers, pistons, etc.

Pics are below of the larger bin, one catalog list and the bike. If you are interested. Let me know. Two pipes some race bits and other parts also come with the bike as well as the rear stand in the pic and working box the bike is sitting on. It is a fixed height rolling box made for shop work.

 

[kubricky]

Pics of the vintage bike are below. Note pics show the Keihin on the bike (cards have been run for about an hour), doing some tuning and heat testing. Motor is in good shape but it should be torn down. Rearsets (pegs and shift rods) that are on the bike are not the new set but they will go with the bike (the mount plates go as well and can be used to adapt rearsets). Bike as it sits is rolling ready. Electric ignition, motor, carbs, and engine controls have been fitted and tested. The front brake rotor and master are ready to be built and mounted. New rubber is in the pictures.

Sorry about the delay.

 

[kubricky]

UPDATE: the vintage bike is off the table - got an offer I couldn't refuse to finish the project.

SV650 is still available - it actually sounds like it is TOO MUCH STUFF to TAKE...smh. Spare motors, parts, wheels, a rolling carpeted box to put it on to work on it

 

[WakTaylor]

Where?