08 R1 windscreen and Race bodywork

[TGRIFF]

Any tips out there for mounting the windscreen on an 08 R1 with some new Armour Bodies. It appears to have only 2 mounting points at the top and nothing to hold the bottom in.

 

[slow50]

I am not 100% I understand your question. I believe you mean you are missing some of the windscreen holes in the upper fairing. I have seen bodywork that just has a few holes predrilled and other bodywork that has no holes. I have an older R1 but I just took my windscreen and used blue painters tape to hold it in the correct position. Then I used a stepped drill bit to drill any missing holes. Hope that helps...

 

[TGRIFF]

The stock wind screen has 2 mounting bolts at the top o either side and then the lower part of the windscreen just 'slots' into tabs on the OEM bodywork. The armor bodies does not have these tabs.

 

[lindr6]

You must drill them in ur self to the windscreen and body work. I have a 07 I drilled 4 holes and used regular windscreen screws and rubber well washers.

 

[TGRIFF]

Sounds good, thanks for the help