2007 CBR 600RR Complete part out. Ohlins, Vortex, Woodcraft

Evil Cupcake

Control Rider
Complete part out of 2007 Honda CBR 600RR race/track bike. Parts will fit all 2007-2012 Honda CBR 600RR bikes and some earlier and newer models.

I will have the bike at the WERA races in Pittsburgh this coming weekend (Sep 6-7) for those who want any parts.

26,767 miles (25,988 street miles)

All aftermarket/race parts have less than 700 miles on them.

-Ohlins TTX rear shock sprung for 190 lb rider. - 900.00 (1700.00 new less than 500 miles on it)
-GP25mm cartridges in stock forks .95 springs. Assembled by MRP 11/2013 - 3 track days - 1300.00 (pending sale)
-Stock front forks setup for 190 lb rider - refreshed 4/2014 - 350.00
-Triples complete upper and lower - ignition delete - 250.00
-Vortex rearsets - 230.00
-Vortex brake/clutch levers - 90.00 some rash on brake lever
-PSR left/right case covers - rash on both - 50.00
-GB Racing polymer r/side case cover like new - 50.00
-Woodcraft clip ons with correct risers to clear 07+ bodywork -100.00
-Galfer stainless steel front brake lines - 50.00
-Yoyodyne race fairing stay w/ blockoff plates - 90.00
-Dynojet Power Commander 5 - 175.00
-Yoshimura carbon fiber RS-5 Slip on exhaust - 150.00
-Sharkskins complete bodywork gray/orange vinyl - 250.00
-Sharkskins superbike tail and tank - 125.00
-LP clear windscreen - 25.00
-Wheel set 1-fr/rear wheels with rotors and rear cush drive (DOT race tires) 450.00
-Wheel set 2-fr/rear wheels with rotors and rear cush drive (RAIN race tires) 450.00
-Vortex rear sprockets 43, 44 - 25.00 each
-Frame 1- Salvage 07 BOS frame-small repair on left eng mount - 450.00
-Frame 2 - Blank 07 frame with receipts from Atlanta Triumph Ducati - 300.00
-Frame 3 - Clean Georgia title 07 frame, perfect ready to register (original owner). - 1500.00 (pending sale)
-Front calipers with new Galfer Race sintered pads - 90.00
-Extra front calipers with stock lines and pads - 50.00
-Guage cluster with 26,767 miles - 150.00
-Engine complete from airbox to oil pan - k/n filter, new iridium plugs - 900.00
-Complete harness (tail light section cut) - 40.00
-Fuel tank - 125.00
-Radiator - 125.00
-Radiator fan - 10.00
-Horn - 5.00
-rider seat - 20.00
-rear subframe - 50.00
-rear swingarm - 50.00
-rear swingarm 2 w/ new RK 520 chain - 80.00
-stock rearsets - perfect 75.00
-stock fairing stay 25.00
-stock tank cover pearl white/silver - 125.00
-stock front fender pearl white - 50.00

I am working on photos and video on track. I can provide specific photos upon request. All parts clean and good condition. Though high mileage, bike runs flawlessly.

Call or text 850- two nine one - 5568.
Stationed on MCB Quantico and can meet in local area for delivery
 
Last edited:

1dwn5up

New Member
I need the air intake piece and a rear master cylinder. Can you let me know if you got them. Also send me pics of sharkskinz.
 

Evil Cupcake

Control Rider
Folks, I'm up at YCRS this week, then will be at WERA races this weekend. I will respond as quickly as possible and will take the best photos as bike is in trailer.
 

1dwn5up

New Member
Thanks. I found a rear master cylinder. Just looking for the Ram Air Intake and possibly sharkskinz.
 
Top