D209GPA wear?
- Thread starter needknees
- Start date
rsmith
New Member
Good info on tire wear
Dave Moss from Catalyst Reaction did some great shows on OTT on the topic of tire wear and the various factors (suspension, pressures, temp, etc) that impact it. I think it covers a lot of the questions being asked here.
http://www.onthethrottle.com/content/category/5/24/73/
Dave Moss from Catalyst Reaction did some great shows on OTT on the topic of tire wear and the various factors (suspension, pressures, temp, etc) that impact it. I think it covers a lot of the questions being asked here.
http://www.onthethrottle.com/content/category/5/24/73/
The first variable is always spring rate. If your springs and sag aren't right then you're pissing in the wind. Next is rebound. Whenever I adjust rebound it seems like I'm always adding. If your springs and sag are correct then try adding a couple clicks of rebound. If it gets worse then go the other way.
Be sure to write down all your current settings so you've got a baseline to work from. If you get to the point where you're just guessing then stop and get some help from a reputable shop.
I read and watch every book and DVD I can get my hands on. The Dave Moss DVD's are the best suspension resource I've found.