Pit Bull Trailer Restraint Pins 2 Sets Honda 600RR R6

W

wmbbmw

New Member
I just got my new 1000RR SP in. I need the Pit Bull Trailer Restraint Pins for it. I have two sets of trailer restraint pins collecting dust; one set was for my 600RR race bike, the other set was for my R6 Race Bike. Would like to trade one of my sets for a CBR 1000RR set. Thanks.
 
1dwn5up

1dwn5up

New Member
Did you try the 600rr pins for it yet? I had purchased a Pit-bull TRS that was for an 08 CBR 1000rr, and the guy used it for his 600. He said he didn't have any issues. Is the 2013/2014 SP different in axle size? I'm willing to trade the 1000rr for yours, if mine happen to work, I don't use them. What year are your R6 set and where are you located?
 
DC-MOTO

DC-MOTO

New Member
How much would you sell the 600RR pin for? I have a pin for a GSXR600 that I would be looking to trade for a 600RR pin but I know that you are looking for a 1000RR pin so that is not going to help you.
 
W

wmbbmw

New Member
1dwn5up - thanks for the post. I was planning on picking the bike up tomorrow, but the dealership is about 30 minutes away and I didn't want to pull my trailer over there only to be disappointed if the pins didn't work. The Axle LOOKS exactly the same as the axle on the 2012's and 2013 1000RR's. As a matter of fact, there's a 13 600RR on the floor and both sides look the same as the 1000. So I may be good to go, but Pit Bull lists different part #'s for the 600's and 1000's. I'll probably just ride the bike home, check it out and let you guys know if they fit. If they don't fit, yes I'm will to trade. I live in Oakton, VA. Where are you? The R6 pins were for my 08.
 
W

wmbbmw

New Member
DC-Moto - I'll get back to you as soon as I find out if the 600 pins will work for my 1000. If they don't I'll sell them to you. I'm in Northern VA, are you in DC, VA, or MD?
 
W

wmbbmw

New Member
1dwn5up - Your 1000RR pins should fit my 1000, the part # is the same for 2004 - 2013 CBR 1000's and my 14 looks exactly the same as the 13's.. So if my 600 pins don't work, I will trade you my R6 pins for your 1000RR pins. Is that cool with you? Thanks for the information.
 
W

wmbbmw

New Member
Update: the 2014 1000RR SP rear axle is different than both the 2013 1000RR & 600RR axles. I don't know if it's because it's a SP, or if it's because it's a 2014. My 600RR pins should be sold tomorrow night, and I'm waiting to hear back from two guys on my R6 pins.
 
You must log in or register to reply here.
Top