Hey Chuck, it's Scott with the orange R6S. You replaced my fork seal Saturday morning at South. You suggested that I replace inner and outer bushings. The schematic I looked up only displayed one bushing referred to as 5EB-23125-00-00 METAL, SLIDE 1. I also ordered replacement rubber seals, O-rings dust covers and another set of seals. The springs in the bike are original, 16k miles. 12k street, 4k track. Since I'm not quite ready to shell the big bucks, I assume it would be advisable to replace the springs. I took a look at the spring rate calculator on Race Tech and came up with .90 kg as a suggested replacement. Does that sound right to you? They wanted $115 for the set. Can you help me. I'm planning on doing the work myself.