Suit is in good condition, never down, a little scuffing here and there. Size XL(46 US). It has a new main zipper and has been let out a couple inches in the torso by Barnicle Bill. I'm 5'11" 200 lbs. and it was a snug fit before altering with back and chest protector being worn. $220 shipped.
Shogun frame sliders in great shape. These are the "cut" type with OEM bodywork. Part #750-5429
Pics too large for upload. Bike was never down so they are not scuffed at all.
$25 shipped
I have no problem throwing my unused k&n filters in the trash. Already ordered Hilfo filters as a replacement. My concern is riders failing tech for something not banned in the riders manual. I could have been one them.
If they are stock folding pegs then just flip them upside down. When I did this I also bolted a piece of unistrut(anything similar will work) under the tail using the passenger footrest bracket holes and then ran ratchet straps to the ceiling. This was just a backup in case it would fall off the...
So according to Steve and bmart, they will not pass K&N filters. I'll trash my remaining K&N filters, but there needs to be consistency at tech or some riders are going to get screwed. If N2 has a problem with them, then publish that fact.
Thanks guys. I think once he gets past the opening session jitters he'll be fine. It's just taking that first step. I always tell him how good the CR's and staff are, so not to worry there.
Slitherin...would you say this type of day is a little less intense(for lack of a better term). I signed my son up for the the June 18 event thinking that is the case. He's a little intimidated by the whole track day thing.
I have 48mm/50mm Woodcraft clip-ons for sale. The original anodizing was a little rough so I stripped and re-anodized them. Good overall finish but does have some imperfections.
$40 shipped
Surprisingly the bearings weren't bad at all. Hardly any signs on the ground surface of the sleeve as well. Just galling between the bolt and sleeve. But new bearings make sense and anti-seize on the bolts on assembly.