2015 Yamaha R1 Superbike

crewnutz

Member
2015 Yamaha R1 Superbike

This bike would be perfect for MotoAmerica this year with the rule change to allow forks and all the sweet stuff! Original bike raced in MotoAmerica by myself and then we were building a proper superbike for Macau. Unfortunately that never happened and the bike still needs some finishing touches as noted on certain parts in the list. We’d rather see it go to someone with the time to race it and finish building it properly.

Superbike motor has one race weekend on it at Laguna Seca
Built with Yamaha kit parts…I don’t know all the details, sorry
Dyno’d at around 195hp to my knowledge
Motor built by RSRacecraft


YEC kit harness
YEC kit ECU
Crescent Racing Superbike fuel tank (over $3,000 new)
H2O Aluminum Superbike Radiator (over $3,000 new…not yet mounted)
Ohlins FGR300 forks (over $10,000 new)
Ohlins TTX shock
Evol Tech triple clamps
Evol Tech shock linkage
Ohlins steering damper w/ Evol Tech mounting kit (not yet mounted)
Brembo GP4-RR front calipers
Brembo billet rear caliper
SBS brake pads
HEL Performance brake lines
Superbike chain adjusters
Evol Tech rearsets
Evol Tech clip-ons
YART carbon fiber air duct
YART carbon fiber fairing stay
Spark full titanium exhaust
BST carbon fiber wheels (over $3,000 per set)
Galfer rotors front and rear
Motion Pro Rev2 throttle
Evol Tech brake lever guard (not shown in photo)
GB Racing crash protection & spools
Speedcell Lithium battery
CRC Superbike fairings
Lots of titanium bolts

Comes with an extra set of BST carbon fiber wheels, ready to mount, and one spare rear BST carbon fiber wheel that needs a rotor and speed sensor ring

Will also throw in front and rear Woodcraft stands as shown in photo

Comes with clean MCO from Yamaha...never titled

Located near York, PA. Price includes "free" delivery to anywhere in continental USA. International can be arranged.

$50,000 OBO


269FFAF7-B8FE-4EA8-9E2F-0ABF321FE29D_zpslve4cmpv.jpg


5B81FE6F-E9FA-48CE-BD35-A0CC82CBA7EC_zpsopj8xgcr.jpg


5ECFEEA3-CE50-40F2-96BE-6C8D2FC32789_zpshsl5utoc.jpg


320111C5-B016-4096-9756-C8C2A79D5736_zps2c7lbhw0.jpg


5634E5F4-260B-4724-A8B9-4A1DCBE18FD4_zpscasyb4vb.jpg


E96FE44E-4F6E-4646-869B-2C9F2F9CCC79_zpsn3jmua7r.jpg
 

vinny337

Vin is in...Beastmode!
Control Rider
Yeah Buddy, I can see why you keep that bike under lock and key. GLWS!
 

crewnutz

Member
Forgot to include:

Brembo billet master cylinder


Bike starts and runs and everything works perfectly...just needs some finishing touches.
 

Emerson

BobbleHeadMoto
Control Rider
ATP/3C
Top