hey all,
i just picked up a ZX10 so i am selling off all of my CBR parts...
and eventually the bike itself...
My bike was an 03 so everything fits the 03,04 model and most of it fits the 05,06
i bought a set of Aaron Goberts 2005 formula extreme carbon fiber bodywork from Erion Honda...i was gonna ride it at trackdays but it is just to nice for the way i have been riding late this season....
it is unrashed, never been down...all of the decals are over the top of the clearcoat so they will peal right off....or you can ride it like this and have a very nice race replica....$650.00
i also purchsed an unused HRC full stainless exhaust from them....
then crashed it....the subframe put a dent in the top of the can..
but nothing to bad...i also wrapped the header with header tape to keep the hot air from blowing on the motor, (i know all about the debate about this, but it is just my preference) $450.00
I am also selling my Elka rear shock, 3 way adjustable with remote resivoir,
this will fit 03 through 06, $550.00
I also have a set of Woodcraft case covers in great shape, very light scrathes on the left side...will fit 03 through 06. $225.00
Vortex clip on's with tubes 43mm these will work on anything with 43mm forks. $110.00
I also have a complete front end from an 06 CBR600RR, i purchased this
to upgrade my 03 front end...the 06 has inverted forks and radial mount brakes..this is the whole front end assembly..forks both tripples, brake callipers. clip ons......$650.00
and finally i have used set of Woodcraft clip on i picked up for the 06 front end...they are 50mm....$120.00
there might be more stuff coming off but that is all i could think off right now...
most of the stuff is still on the bike...
so i will post pics as it comes off later this afternoon and tomorrow...
here is a photobucket link that will have everything on it by tomorrow night..
http://s262.photobucket.com/albums/i...%20for%20sale/
thanx,
you can get ahold of me by responding to this thread,
p.m., email or give me a call....phone calls seem to work the easiest
and fastest but i will respond to all pms and email pretty quick....
the prices listed are plus shipping,,,
and they are all starting prices...
if you need something listed and wanna shoot me an offer give it a shot..
the worst i could do is laugh in your ear and hang up on you : )
and lastly I am looking for any race parts for a 04 ZX10 if you have anything
let me know i would be willing to buy or trade for em....
peace..
__________________
duane #613
jackson, MI
motogypsyracing@yahoo.com
734-717-5478
03 CBR600RR
04 ZX10
2000 Aprilia RS250
i just picked up a ZX10 so i am selling off all of my CBR parts...
and eventually the bike itself...
My bike was an 03 so everything fits the 03,04 model and most of it fits the 05,06
i bought a set of Aaron Goberts 2005 formula extreme carbon fiber bodywork from Erion Honda...i was gonna ride it at trackdays but it is just to nice for the way i have been riding late this season....
it is unrashed, never been down...all of the decals are over the top of the clearcoat so they will peal right off....or you can ride it like this and have a very nice race replica....$650.00
i also purchsed an unused HRC full stainless exhaust from them....
then crashed it....the subframe put a dent in the top of the can..
but nothing to bad...i also wrapped the header with header tape to keep the hot air from blowing on the motor, (i know all about the debate about this, but it is just my preference) $450.00
I am also selling my Elka rear shock, 3 way adjustable with remote resivoir,
this will fit 03 through 06, $550.00
I also have a set of Woodcraft case covers in great shape, very light scrathes on the left side...will fit 03 through 06. $225.00
Vortex clip on's with tubes 43mm these will work on anything with 43mm forks. $110.00
I also have a complete front end from an 06 CBR600RR, i purchased this
to upgrade my 03 front end...the 06 has inverted forks and radial mount brakes..this is the whole front end assembly..forks both tripples, brake callipers. clip ons......$650.00
and finally i have used set of Woodcraft clip on i picked up for the 06 front end...they are 50mm....$120.00
there might be more stuff coming off but that is all i could think off right now...
most of the stuff is still on the bike...
so i will post pics as it comes off later this afternoon and tomorrow...
here is a photobucket link that will have everything on it by tomorrow night..
http://s262.photobucket.com/albums/i...%20for%20sale/
thanx,
you can get ahold of me by responding to this thread,
p.m., email or give me a call....phone calls seem to work the easiest
and fastest but i will respond to all pms and email pretty quick....
the prices listed are plus shipping,,,
and they are all starting prices...
if you need something listed and wanna shoot me an offer give it a shot..
the worst i could do is laugh in your ear and hang up on you : )
and lastly I am looking for any race parts for a 04 ZX10 if you have anything
let me know i would be willing to buy or trade for em....
peace..
__________________
duane #613
jackson, MI
motogypsyracing@yahoo.com
734-717-5478
03 CBR600RR
04 ZX10
2000 Aprilia RS250