Kevin42
New Member
Ok, here is the issue:
I have a 2006 R6 that has a power commander with quick shifter module. When it’s cold I try to start it and it will immediately stall. I have to hold the throttle open after it starts until the temperature indicator goes from the word “Low “to a number which is around 100 degrees. Then it will idle without stalling. Now, between start and 100 degrees you have to hold the throttle just right. If you don’t, it will stall. If it stalls 2 or 3 times, the battery won’t crank it over which is really annoying. It is probably a power commander setting but when I bought the bike it didn’t come with what ever cable or software is needed to configure it.
Any ideas?
I have a 2006 R6 that has a power commander with quick shifter module. When it’s cold I try to start it and it will immediately stall. I have to hold the throttle open after it starts until the temperature indicator goes from the word “Low “to a number which is around 100 degrees. Then it will idle without stalling. Now, between start and 100 degrees you have to hold the throttle just right. If you don’t, it will stall. If it stalls 2 or 3 times, the battery won’t crank it over which is really annoying. It is probably a power commander setting but when I bought the bike it didn’t come with what ever cable or software is needed to configure it.
Any ideas?