Adrian_Jones
New Member
Please contact me. I need to sell ASAP. Making the switch from roadracing to cycling. And just need to close this chapter. This is a very fast, solid bike with a fresh motor in it. For those that know Summit Point, I have run some high 1:13's with this bike and I was the only thing keeping it from seeing the 12's.
At 6500.00 this is a steal.. I just need to move it as quick as possible before i start racing again..
here is the list of what the bike has on it and what has been done to the motor.
- 190hp on MR-12
- full radious valve job
- .018 head gasket
- degreed Ape cam sprockets
- web custom ground web cam
- high volume oil pump gear
- high pressure oil refief valve
- fuel management system
- pair valve modification
General Info on Bike:
- AMA Racer Shane Narbone’s “B” bike for AMA Superbike
- Front Forks – 20mil Ohlins kit
- Ohlins TTX Rear Shock
- Ohlins Steering Damper
- Full Titanium TiForce Exhaust system
- SharkSkinz Bodywork
- POwerCommander III
- Cable Clutch system (changed out hydrualic clutch)
- DynoJet QuickShifter
- Woodcraft Clip-Ons / Vortex Handle Bars
- Custom-machined lightweight subframe
- Woodcraft Billet Case Covers
- Custom fabricated lightweight front fairing stay, sub-frame, footpeg brackets and shifter
- Braided Brake Lines
- Brembo Front Master Cylinder w/Collapsable break lever
- Fresh Vesrah Clutches/Steels with one race on them
- Frame Sliders
- Safety Wired for WERA/CCS
- Supberbike seat
- XT Racing laptimer
At 6500.00 this is a steal.. I just need to move it as quick as possible before i start racing again..
here is the list of what the bike has on it and what has been done to the motor.
- 190hp on MR-12
- full radious valve job
- .018 head gasket
- degreed Ape cam sprockets
- web custom ground web cam
- high volume oil pump gear
- high pressure oil refief valve
- fuel management system
- pair valve modification
General Info on Bike:
- AMA Racer Shane Narbone’s “B” bike for AMA Superbike
- Front Forks – 20mil Ohlins kit
- Ohlins TTX Rear Shock
- Ohlins Steering Damper
- Full Titanium TiForce Exhaust system
- SharkSkinz Bodywork
- POwerCommander III
- Cable Clutch system (changed out hydrualic clutch)
- DynoJet QuickShifter
- Woodcraft Clip-Ons / Vortex Handle Bars
- Custom-machined lightweight subframe
- Woodcraft Billet Case Covers
- Custom fabricated lightweight front fairing stay, sub-frame, footpeg brackets and shifter
- Braided Brake Lines
- Brembo Front Master Cylinder w/Collapsable break lever
- Fresh Vesrah Clutches/Steels with one race on them
- Frame Sliders
- Safety Wired for WERA/CCS
- Supberbike seat
- XT Racing laptimer