gsxrpilot
Owner Of Pro Speed Racing Apparel
After a year in the making my 1996 GSXR 750 is complete!
Started it's life as a 1996 GSXR 750 Street Bike that was purchased off eBay in Dec 2017. A Second Parts Donor Bike was purchased a short time later. Work was started here Fla was then shipped to PA to be completed. Bj MacDonald of DART Competition Engines and Fabrication assembled and fabricated what was necessary to get this bike to what you see today. So what do you have?
Cognito Moto Custom 30 Degree Triple Tree's (28 also available)
2003/4 GSXR 1000 Forks Refreshed with Ohlins Springs (MDM)
2015 GSXR 750 Calipers w (ti hardware)
MotoD Clip-ons with IRC 19x19 Radial Master, Motion Pro Throttle
Clean Rust Free Tank with rebuilt Fuel Pump feeding 39mm Keihin Flat Slide carburetor's thru custom Air-Tech Airbox converstion with airducts.
Sharkskin's Bodywork with Double Bubble Windscreen (Spare Screen included)
Pro-tec Generator Cover
White Frame Savers (Not Installed)
Micron Full Exhaust
Galfer Superbike rotors (ti hardware) and Lines, Lighted rear Rotor with Line.
Danmoto Rearsets (spare set inc)
RSR evolution SwingArm Eccentrics to run Custom Braced 2005/6 GSXR 1000 Swingarm
Fresh Powder coated GSXR 1000 wheels with new bearings and Fresh Pirelli Slicks
Ohlins Rear Shock Refreshed by (MDM) 185lb rider
Power Coated Frame and Swingarm
Keyless gas cap, On/Off Start switch
New Chain and Sprockets, Battery, etc..
I am sure I am missing something. Lots of spares. Changing direction in life and just wanted to see this bike completed. I have a lot invested that I don't expect to recover, that's just how these bikes workout. Interested persons are welcome to Message or call.
Ken
Bike will be at RRR July 4th weekend.
Started it's life as a 1996 GSXR 750 Street Bike that was purchased off eBay in Dec 2017. A Second Parts Donor Bike was purchased a short time later. Work was started here Fla was then shipped to PA to be completed. Bj MacDonald of DART Competition Engines and Fabrication assembled and fabricated what was necessary to get this bike to what you see today. So what do you have?
Cognito Moto Custom 30 Degree Triple Tree's (28 also available)
2003/4 GSXR 1000 Forks Refreshed with Ohlins Springs (MDM)
2015 GSXR 750 Calipers w (ti hardware)
MotoD Clip-ons with IRC 19x19 Radial Master, Motion Pro Throttle
Clean Rust Free Tank with rebuilt Fuel Pump feeding 39mm Keihin Flat Slide carburetor's thru custom Air-Tech Airbox converstion with airducts.
Sharkskin's Bodywork with Double Bubble Windscreen (Spare Screen included)
Pro-tec Generator Cover
White Frame Savers (Not Installed)
Micron Full Exhaust
Galfer Superbike rotors (ti hardware) and Lines, Lighted rear Rotor with Line.
Danmoto Rearsets (spare set inc)
RSR evolution SwingArm Eccentrics to run Custom Braced 2005/6 GSXR 1000 Swingarm
Fresh Powder coated GSXR 1000 wheels with new bearings and Fresh Pirelli Slicks
Ohlins Rear Shock Refreshed by (MDM) 185lb rider
Power Coated Frame and Swingarm
Keyless gas cap, On/Off Start switch
New Chain and Sprockets, Battery, etc..
I am sure I am missing something. Lots of spares. Changing direction in life and just wanted to see this bike completed. I have a lot invested that I don't expect to recover, that's just how these bikes workout. Interested persons are welcome to Message or call.
Ken
Bike will be at RRR July 4th weekend.