Hey guys.....
after spending last weekend riding my cup bike around Jennings chasing a couple of my friends on TZ's i have decided to let the little Ape go and get a GP bike....
here is what it is....
2000 Cup Bike....5k on the Odometer..
aftermarket rearsets.
vortex clip ons...
rear shock refurbished and sprung for 180 lbs....this past summer...
Tyga Pipes...
very well maintained over the past 2 owners....(myself and Dits)
rebuilt last March...new crank, pistons and pins and clips and rings...
while it was down i replaced all the fluids...case oil..fork oil..brake fluid..currently has engine ice in the radiator..i also cleaned the power valves while i had it apart....
this was all done 8 trackdays ago...so.. i figure around 600 or 700 miles on the rebuild...should still be good for a while...still runs good and pulls greats..
the bodywork that is on it has been down, repaired hastily by me and repainted with a rattle can...
i never cared much how pretty it was....
but it was beautiful when i bought it and if you want it to look pristine it will need new bodywork....
Price for the bike ......$4300.00
for this price i will include a decent set of trackside spares...
footpegs....shift lever..brake lever...
clip on tube...
clutch lever...
gearing....13, 14, 15, front and 41, 42, 43, 44, 45 rear....
couple of chains...
some jetting...
2 extra sets of different heat range spark plugs...
a set of front brake pads...
and a couple litres of oil.....
here is a link to the pics....
http://s262.photobucket.com/albums/ii99/motogypsy/2000%20Aprilia%20RS250/
i also have a ton of other spares that i will sell with the bike or seperately...
set of wheels...
2 fairing stays...1 with a gage cluster...
extra challenge bodywork.....seat fairing...rear cone...left and right side..
spare seat..
a few more sets of brake pads...
oem rearset parts...
extra handle bar controls...
set of rain tires...
engine cases...
couple of blown cranks...
used but usable piston...
assorted gaskets...
assorted cables and hoses and such...
that is all i can think of right now....
$4300 for the bike with trackside spares....$5300 for everything i have...
i am riding it at Jennings GP, florida this weekend....
then heading home to Michigan...
so i can deliver on the way or go out of my way to deliver for mileage $....
i will be on and off the computer all weekend...
but if you are serious and want to talk...
give me a calll....leave a message and I will call you back when i get a
brake at the track....
this bike has been a good friend and needs nothing....as i am riding it this weekend...
i just want to move on to a more competative 2-stroke to run in the USGPRU
and chase my friends around on...
thanx,,,,
duane
734-717-5478
__________________
duane
jackson, mi.
duane.1966@yahoo.com
Motogypsy Racing
#613
after spending last weekend riding my cup bike around Jennings chasing a couple of my friends on TZ's i have decided to let the little Ape go and get a GP bike....
here is what it is....
2000 Cup Bike....5k on the Odometer..
aftermarket rearsets.
vortex clip ons...
rear shock refurbished and sprung for 180 lbs....this past summer...
Tyga Pipes...
very well maintained over the past 2 owners....(myself and Dits)
rebuilt last March...new crank, pistons and pins and clips and rings...
while it was down i replaced all the fluids...case oil..fork oil..brake fluid..currently has engine ice in the radiator..i also cleaned the power valves while i had it apart....
this was all done 8 trackdays ago...so.. i figure around 600 or 700 miles on the rebuild...should still be good for a while...still runs good and pulls greats..
the bodywork that is on it has been down, repaired hastily by me and repainted with a rattle can...
i never cared much how pretty it was....
but it was beautiful when i bought it and if you want it to look pristine it will need new bodywork....
Price for the bike ......$4300.00
for this price i will include a decent set of trackside spares...
footpegs....shift lever..brake lever...
clip on tube...
clutch lever...
gearing....13, 14, 15, front and 41, 42, 43, 44, 45 rear....
couple of chains...
some jetting...
2 extra sets of different heat range spark plugs...
a set of front brake pads...
and a couple litres of oil.....
here is a link to the pics....
http://s262.photobucket.com/albums/ii99/motogypsy/2000%20Aprilia%20RS250/
i also have a ton of other spares that i will sell with the bike or seperately...
set of wheels...
2 fairing stays...1 with a gage cluster...
extra challenge bodywork.....seat fairing...rear cone...left and right side..
spare seat..
a few more sets of brake pads...
oem rearset parts...
extra handle bar controls...
set of rain tires...
engine cases...
couple of blown cranks...
used but usable piston...
assorted gaskets...
assorted cables and hoses and such...
that is all i can think of right now....
$4300 for the bike with trackside spares....$5300 for everything i have...
i am riding it at Jennings GP, florida this weekend....
then heading home to Michigan...
so i can deliver on the way or go out of my way to deliver for mileage $....
i will be on and off the computer all weekend...
but if you are serious and want to talk...
give me a calll....leave a message and I will call you back when i get a
brake at the track....
this bike has been a good friend and needs nothing....as i am riding it this weekend...
i just want to move on to a more competative 2-stroke to run in the USGPRU
and chase my friends around on...
thanx,,,,
duane
734-717-5478
__________________
duane
jackson, mi.
duane.1966@yahoo.com
Motogypsy Racing
#613