eRw1n
New Member
I just rebuilt my forks. I did racetech’s spring rate calculator and got the recommended springs. They were a good bit longer than my stock springs, but I didn’t think anything of it. I think I remember seeing within or on the packaging that they may be longer. My spacer didn’t fit as snug inside the top of the new spring as it did in the stock spring. Again, didn’t think much of it. Well now the front end is completely reassembled and with my preload turned all the way out, I only have 12mm of rider sag. I double checked the part number on my packing slip with the part number from the rate calculator. They match. Am I missing something or did I just get the wrong springs?