Matt
New Member
Bike has been sold!!!
2005 Honda 600RR
Details
Makes a bit over 110hp mapped for pump gas, just tuned in July by Moon's SuperCycle
approx 10k miles on the engine, only work done is degreed cams and thin head gasket, otherwise stock.
clean title
Two complete sets of wheels
Penske 20mm kit in the forks .925 springs
Penske triple clicker shock 625lb spring
Suspension completely serviced by TSE early 2010
Akrapovic EVO Ti Full system
Powercommander 3 USB w/ ignition module and quick shifter
STM Slipper clutch
Vesrah SRJL brake pads, new in July. (with spare set)
S/S lines front and back
Brembo 19x18 Master Cylinder
Folding brake lever
Vortex Clip ons
Vortex Fairing stay
Vortex Rear sets
Vortex Gas Cap
Full set of sprockets (mostly vortex) 15,16,43,44,45,46,47
New DID chain in July
new Vesrah clutch in Sept 2010
Woodcraft stator case cover, and right side cover puck
New Radiator
Lightweight race battery
Put it on a diet this spring, its in the low 380lbs range.
spares
spare full set of bodywork + another tank cover, maybe more
vortex clip on bars
vortex fairing stay
stock fairing stay
set of vortex foot pegs for vortex rear sets
.85 spare front springs somewhere
600lb rear spring
brembo master cylinder rebuild / crash kit
NEW set of Vesrah SRJL brake pads
one working engine, completely stock complete with case covers in good shape
one non-working engine (broken rod), built head (decked / valve job, SS legal)
spare radiator works and holds pressure but needs fins straightened
right hand controls
stock master cylinder
2 throttle tubes
grips
two sets of throttle cables (one set NEW)
two spare clutch cables (one NEW)
subframe
clutch case cover and both covers on the spare motor
(used) clutch
clutch basket
wiring harness
ECU
fuel pump
clutch levers
brembo brake lever
2 spare sets of coils
Pictures on Gron4's site
http://www.gron4.com/2010/082110/ex/28/
http://www.gron4.com/2010/090610/adv/28/
Just after I painted it (yellow number plates now white)
It's not the prettiest girl at the ball but it goes like mad and it's been VERY good to me. I've put a lot of work into it this year to get it in tip top shape and it's very well sorted as it sits right now. The bike has has proven itself capable of running mid-pack expert.
Asking $4500 for everything. Can deliver to any Mid-West trackday. Barber for sure in Nov, maybe Road Atlanta. Or shipping can be arranged. Could possibly stow-away on someone's rig from a Mid-West event.
It's almost hard to put this ad up, I love this bike!
2005 Honda 600RR
Details
Makes a bit over 110hp mapped for pump gas, just tuned in July by Moon's SuperCycle
approx 10k miles on the engine, only work done is degreed cams and thin head gasket, otherwise stock.
clean title
Two complete sets of wheels
Penske 20mm kit in the forks .925 springs
Penske triple clicker shock 625lb spring
Suspension completely serviced by TSE early 2010
Akrapovic EVO Ti Full system
Powercommander 3 USB w/ ignition module and quick shifter
STM Slipper clutch
Vesrah SRJL brake pads, new in July. (with spare set)
S/S lines front and back
Brembo 19x18 Master Cylinder
Folding brake lever
Vortex Clip ons
Vortex Fairing stay
Vortex Rear sets
Vortex Gas Cap
Full set of sprockets (mostly vortex) 15,16,43,44,45,46,47
New DID chain in July
new Vesrah clutch in Sept 2010
Woodcraft stator case cover, and right side cover puck
New Radiator
Lightweight race battery
Put it on a diet this spring, its in the low 380lbs range.
spares
spare full set of bodywork + another tank cover, maybe more
vortex clip on bars
vortex fairing stay
stock fairing stay
set of vortex foot pegs for vortex rear sets
.85 spare front springs somewhere
600lb rear spring
brembo master cylinder rebuild / crash kit
NEW set of Vesrah SRJL brake pads
one working engine, completely stock complete with case covers in good shape
one non-working engine (broken rod), built head (decked / valve job, SS legal)
spare radiator works and holds pressure but needs fins straightened
right hand controls
stock master cylinder
2 throttle tubes
grips
two sets of throttle cables (one set NEW)
two spare clutch cables (one NEW)
subframe
clutch case cover and both covers on the spare motor
(used) clutch
clutch basket
wiring harness
ECU
fuel pump
clutch levers
brembo brake lever
2 spare sets of coils
Pictures on Gron4's site
http://www.gron4.com/2010/082110/ex/28/
http://www.gron4.com/2010/090610/adv/28/
Just after I painted it (yellow number plates now white)
It's not the prettiest girl at the ball but it goes like mad and it's been VERY good to me. I've put a lot of work into it this year to get it in tip top shape and it's very well sorted as it sits right now. The bike has has proven itself capable of running mid-pack expert.
Asking $4500 for everything. Can deliver to any Mid-West trackday. Barber for sure in Nov, maybe Road Atlanta. Or shipping can be arranged. Could possibly stow-away on someone's rig from a Mid-West event.
It's almost hard to put this ad up, I love this bike!
Actually, I'm working on painting and I'd be happy to fix up the bodywork that's on it and the spare set.