2008 Honda CBR1000RR - Very Clean

Discussion in 'Motorcycles' started by ijkelly, Jul 30, 2018.

  1. ijkelly

    ijkelly New Member

    2008 Honda CBR1000RR - Clean title in hand
    • Ohlins front NIX 30, 30 mm inserts done by Markbilt & Ohlins TTX GP set up for 180 lbs rider at advanced/expert pace. 6 track days on suspension. ($3,000 install)
    • Sharkskins bodywork with Superbike tail, Custom Repsol Paint
    • Yoyodyne Slipper Clutch
    • Vortex sprockets & chain (-1/+2)
    • Vortex clip ons
    • ASV Levers
    • Key switch harness (eliminator)
    • Galfer SS front brake lines
    • Annitori Pro Quickshift
    • Woodcraft readsets
    • Power commander 3
    • K&N airfilter
    • Two brother slip on
    • Woodcraft frame sliders
    • EBC front brake pads
    • Dunlop GPA-pro medium compound (1 day left on both)
    • Vortex Quick fill gas cap
    Bike runs great and the suspension is dialed in perfect. Bike only has 6 track days on it since it was converted. I was able to get the bike to run a 1.33 at NYST. Bike has never been raced but is ready to race if needed.

    I've maintaned this bike very well, oil changes every 3k miles on the street and every 3-4 track days. I oil/lube all the moving parts on a regular basis. As you can see from the pictures the bike is very clean too.

    I'm selling this bike because it's a secondary track bike for me and I'm looking to only ride a 600 on the track.

    Clean title in hand, only 1 owner. Bike is currently located near Scranton, PA but can be brought down near West Chester, PA or up to NYST depending on the weekend.
     

    Attached Files:

  2. ijkelly

    ijkelly New Member

    asking $5,400 OBO
     
  3. MrFrzz

    MrFrzz slow and wide

    Beautiful bike. Good luck with sale!

    Needs a Dunder Mifflin logo since its in Scranton. ;)
     
  4. ijkelly

    ijkelly New Member

    Haha yes! Thanks.
     
  5. ijkelly

    ijkelly New Member

  6. ijkelly

    ijkelly New Member

    Bump, Price drop to $5,000
     
  7. Neal johnson

    Neal johnson New Member

    Do you know anyone looking for OEM repsol plastics. They came off a 2016 cbr 1000 since the bike it a full track bike no need to have them.
     
  8. ijkelly

    ijkelly New Member

    Not that I know of.. but if I were you, I'd hold onto them along with all the other street parts. it's not easy selling a designated track bike. For some reason people want to ride track bikes on the street too..
     
  9. Neal johnson

    Neal johnson New Member

    Would you be interested in selling your plastics?
     
  10. ijkelly

    ijkelly New Member

    I don't have any plastics for this bike.
     
  11. ijkelly

    ijkelly New Member

    Price drop to 4500
     
  12. Neal johnson

    Neal johnson New Member

    Let me know if you decide to part out. Would be interested in wheels and race body work


    Sent from my iPhone using Tapatalk
     
  13. byron21

    byron21 New Member

    Any chance this bike is still available?
     
  14. ijkelly

    ijkelly New Member

    Yes but I have some other interested buyers. Shoot me a message if you're interested and I'll keep you posted on the availability of the bike.
     
  15. ijkelly

    ijkelly New Member

    I've decided to part this bike out. Hit me up with an offer on any of the parts and we can work out a deal.
     

Share This Page