2016 Yamaha R3 – Race ready, Galespeed forged rims, Clear title & all Street Parts

1983Merman

New Member
2016 Yamaha R3 – Race ready w/ Galespeed forged rims and Clear title with all Street Parts

Clear title
756 miles (may go up a little)

Galespeed Type R Forged aluminum rims (Pearl White) with 520 & 415 gearing
· 520 aluminum rear sprockets = 41, 42, 43, 44 and 45T
· 415 aluminum rear sprockets = 56, 57 and 58T
· Rotors = Braking (front and rear)

Stock wheels (Blue) with 520 & 415 gearing
· 43T 520 rear sprocket
· 57T 415 rear sprocket
· Rotors = Galfer (front) & Norton Fab (rear)

415 & 520 chain kits
Ohlins suspension front and rear (currently setup for 165 lb rider)
TighTails front fairing stay
GPR steering damper
Woodcraft Clipons
Woodcraft Rearsets
Woodcraft lever guards
GB Racing case covers (both sides)
Galfer braided lines
Yoshimura full exhaust (aluminum can) + extra carbon can with minor scrapes + extra headers
Shorai lithium battery
MotionPro Rev2 throttle advance with all cams
Sharkskinz race body fiberglass (with raised seat)
Dynojet Power Commander V with quick shifter
Moto-D keyless fuel cap
Moto-D magnetic oil drain bolt
Captive rear caliper
Fast Frank captive spacers front/rear
TST captive rear adjuster with superbike lifters
Spears block-off plate
Keyless ignition (not currently installed)
Lots of titanium bolts (calipers etc)
Shogun frame sliders
Completely race-ready (wire-tied to pass WERA & CCS tech)
Extra levers & various other parts (get everything I have in my R3 parts bin,,oil filters, replacement bars, levers, rearset parts etc)

Tuned (40 hp) by Huey @ Marietta Motorsports

Suspension setup by David @ FastBike Industries

Original street fairings (Blue/Grey), streetbike parts (seat, lights, rearsets etc) + TST LED halo front turn signal, TST fender eliminator & Barracuda rear turn signals) come with if want to convert back or sell off separately. Mint condition (ceramic coated factory paint).

$7200 with the Galespeed wheels (and associated sprockets, rotors etc.); $6000 without Galespeed wheels.

Will entertain selling the Galespeed wheels separately ($1500) ONLY after the bike is sold (if they aren’t sold with the bike).

Bike is located in Morgantown, WV (about an hour south of Pittsburgh). Happy to bring with me to the track – planning on being at Road America CCS (July 17/18), Summit CCS (August 15/16), Nelson N2/WERA (Ausgust 28-30), PittRace N2/WERA (Sept 11-13) and Barber for WERA GNF in October. May be able to help with other transport based upon time availability on a case-by-case basis. Any other questions just let me know.

Bike has been down once (low side in the grass on outside of turn 4 at Nelson) – full fiberglass was replaced (wrecked fiberglass will come with bike if want it), full Yoshimura exhaust was replaced (with a full Yoshimura exhaust – this is why there is an extra carbon can & headers – midpipe got bent/punctured & had to buy new full exhaust because of time crunch to replace) & TighTails front fairing stay was replaced (with another TighTails fairing stay).

Tried taking some pics inside...lighting not great (sorry)...anything particular want to see a pic of, jsut let me know.

Great bike – thanks for looking.
 
Top