'03-'05 R-6 street,track and race parts f/s

O

olyeller

New Member
1-S.T.M. slipper clutch,n.i.b : $650/obo
1 set track plastics good quality primered-$400/obo
1-front tire,wheel,complete ass'y-$300/obo (17 miles on 'em)
1-rear wheel,tire,complete ass'y-$300/obo will deal on pair(yup 17 miles on it too!)
1 set cheetah street plastics minus tail-$200/obo
1-set tire warmers,n.i.b, podium racing, $250/obo
1-vortex upper triple clamp
1-bmc air filter
1-left hand switch w/ all wiring
2-russell coated s/s brake lines w/ 45 degree fittings
1-front sprocket cover
1-coolant tank cover
1- works performance spring adkustment tool
1-set ram air tubes w/ loom stay
2-complete set of DZUS fasteners, 1/4 turn
1-clutch lever
1-clutch hub tool,vise grip style
1-oem clutch cover gasket

all of the parts listed above are new in box, or 99%.The plastics listed have never been drilled or installed.
3-ziploc bags of factory fasteners,bolts ,etc.some new,some not
1-yoshimura slip-on w/mid pipe, used dented but works
1-headlight elim. wiring for trackdays
2-sets tail plastics for '99-up yzf600r
1-set upper/lowers for '99-up yzf600r
1-set battery covers for '99-up yzf600r.
1-set led turn signals,f/r
These parts in the 2nd section are used,but in working order.
Link to pics:http://s131.photobucket.com/albums/p295/olyeller_photos/
 
Bucky Badger

Bucky Badger

New Member
How much for the dented yosh with mid pipe, ss brake lines with 45 degree fittings and dzus fasteners shipped to 53072?
 
O

olyeller

New Member
Bucky Badger;39362 wrote: How much for the dented yosh with mid pipe, ss brake lines with 45 degree fittings and dzus fasteners shipped to 53072?
Click to expand...
BB, I removed the pipe from a "99 yzf600r,(it didn't fit it right) so I cannot sell it to you as a r-6 part in good conscience not knowing what it fits.so,please follow photobucket link and look carefully at pipe and decide for yourself.if still interested,how's $50 shipped?As for the Dzus $50 for them(2sets ,new)the russell braided Idon't know what they fit,but haven't been installed.If the fittings don't work on your bike russell sellthem for all bikes.$35 for them.HOW 'bout $135 shipped for all of the parts requested?
Thanks,
mac
 
O

olyeller

New Member
s/s lines

These lines were origionall for a buell. You can change ends if the supplied ends don't work on your bike.They are rear only....NOT front. Gimme $50 bucks shipped.
thx,mac
 
You must log in or register to reply here.
Top