design-engine
Member
selling 2009 Vesrah GSXR 600 racebike w/ SS build Engine
Bike was rebuilt in July of 2012 Two sets of wheels Great for a racebike or trackbike. Fresh Clutch. engine oil changed every riding weekend. Custom Vinyl wrap
Pictures:
http://design-engine.com/design-engine-news/design-engine-new-logo-vinyl-graphics-gsxr-600
Asking:
8k
Extras:
and I can throw in a gob of take offs and change your tires for you free for a year I might even re wrap the bike for you if your nice.
http://www.vesrahsuzuki.com/
Details:
Everything is drilled and safety wired. Vortex everything. Pit bull dampener. I will thro in a sprocket carrier + slightly used assortment of sprockets. Leo Vince http://www.leovinceusa.com/ exhaust. Brimbo http://www.brembo.com/ front brakes and I can't remember what fancy brake lines I have but they are bad ass. I use only AP racing PRF brake fluid. I could thro in an extra set of Vesrha pads but if your not used to em I suggest a lesser brand. Those fuckers will slide the front right into any turn one.
Each Engine Rebuild was done by Mark Junge himself.
AMA spec. Also be legal in WERA and CCS/ASRA
Cylinder head milled and Serdi Valve job
Vesrah .45 Cylinder Head Gasket
Aftermarket cam sprocket adaptors + all the grinding + shims to make fast rear/front wheel changes
Vesrah Clutch with custom set-up
The bike is mapped for 93 octane pumper fuel
This is a 24k racebike
bart@designengine.com txt okay: 312.804.4719 The bike is in Orlando FL at the moment however I live in Chicago.
Bike was rebuilt in July of 2012 Two sets of wheels Great for a racebike or trackbike. Fresh Clutch. engine oil changed every riding weekend. Custom Vinyl wrap
Pictures:
http://design-engine.com/design-engine-news/design-engine-new-logo-vinyl-graphics-gsxr-600
Asking:
8k
Extras:
and I can throw in a gob of take offs and change your tires for you free for a year I might even re wrap the bike for you if your nice.
http://www.vesrahsuzuki.com/
Details:
Everything is drilled and safety wired. Vortex everything. Pit bull dampener. I will thro in a sprocket carrier + slightly used assortment of sprockets. Leo Vince http://www.leovinceusa.com/ exhaust. Brimbo http://www.brembo.com/ front brakes and I can't remember what fancy brake lines I have but they are bad ass. I use only AP racing PRF brake fluid. I could thro in an extra set of Vesrha pads but if your not used to em I suggest a lesser brand. Those fuckers will slide the front right into any turn one.
Each Engine Rebuild was done by Mark Junge himself.
AMA spec. Also be legal in WERA and CCS/ASRA
Cylinder head milled and Serdi Valve job
Vesrah .45 Cylinder Head Gasket
Aftermarket cam sprocket adaptors + all the grinding + shims to make fast rear/front wheel changes
Vesrah Clutch with custom set-up
The bike is mapped for 93 octane pumper fuel
This is a 24k racebike
bart@designengine.com txt okay: 312.804.4719 The bike is in Orlando FL at the moment however I live in Chicago.