daddyfriedrich
Member
Anyone have experience with a 2 psi pressure valve from Wilwood in a motorcycle application? Love to hear about it. TIA
Thanks, just refitted twin Spiegler hose up front. Bled during installation and (as I always do) the next afternoon. Yinzers . . .avizpls;219193 wrote: or flush and bleed it with fresh fluid and see if that helps. On such a smaller system than car brakes, with fewer losses.....id probably pass on this.
If your brake system is working correctly there wont be a delayed response. My fear with you adding this is you're just trying to cover up another issue like a worn out master cylinder. I'd suggest trying a brembo 19x18 master and see what that feels like, I'm guessing you'll find it feels perfect and doesn't need anything to "take up the slack" in the lever.daddyfriedrich;219320 wrote: I'm looking for faster response from the brakes. I was clued into this idea by another rider with a handicap, so it must be working for him. I'd really like to see what one of the big bore Brembo systems feels like.:notsure:
Pull fasterdaddyfriedrich;219320 wrote: I'm looking for faster response from the brakes. I was clued into this idea by another rider with a handicap, so it must be working for him. I'd really like to see what one of the big bore Brembo systems feels like.:notsure:
Ho'omake'aka (funny guy)Hawaiif4i;219472 wrote: Pull faster